Product Features
Multi-interface, can connect a variety of M.2 interface SSD, easily expand the system disk.
With LED indicator for easy control of SSD operation.
Reserve external power supply interface, when using high-power SSD, you can connect external power supply at any time to increase power supply.
Fixed SSD copper studs are removable, for connection to the various specifications SSDs easily.
High quality elastic connectors for a more stable contact.
Gold finger gold plating, better conductivity.
Product Specifications
Product Name: PCI-E 4X TO NGFF 2B/M KEY Riser
Interface Type: SATA7P, M.2 M-KEY, M.2 B-KEY
Power Supply Interface: SATA15P
Support Hard Disk: M.2 M-KEY (PCIe protocol) and M.2 B-KEY (SATA protocol)
Support Slot: PCIE X4, PCIE X8, PCIE X16
Product Size: mm
Support Operating System: Windows, MAC, Linux
Product Features
Multi-interface, can connect a variety of M.2 interface SSD, easily expand the system disk.
With LED indicator for easy control of SSD operation.
Reserve external power supply interface, when using high-power SSD, you can connect external power supply at any time to increase power supply.
Fixed SSD copper studs are removable, for connection to the various specifications SSDs easily.
High quality elastic connectors for a more stable contact.
Gold finger gold plating, better conductivity.
Product and Accessories List
Please check the following list to see if the products and accessories in the package are complete. If you have any questions, please feel free to contact your dealer for support.
PCI-E 4X TO NGFF 2B/M KEY Adapter Card
SATA Line
Phillips Screwdriver
Manual
After Sales Card
Installation Steps:
1.On the front side of the PCB, insert two B-KEY (SATA) M.2 hard drives into the interface and secure them (the copper holes on the board are equipped with gold-plated copper posts and set screws).
2.On the back of the PCB, insert the M-KEY (PCI-E) NVMe M.2 hard disk into the interface and secured it
3. Insert the PCB board with the hard disk into the computer's motherboard card slot (PCI-E X4/PCI-E X16). Position the PCB board and take out two SATA data cables. Plug one end into the SATA port on the board and the other end insert into the SATA interface of the computer motherboard, then the installation is complete.
Instructions:
Take out the product and insert the ‘Gold Finger’ interface of the product into the PCI-E 16X card slot of the computer, as shown below:
PREVIOUS PAGE